Contracts
Laboratory & precision equipment in East Midlands
Public sector contract notices in laboratory & precision equipment covering East Midlands, from Find a Tender and Contracts Finder.
Laboratory & precision equipment notices in East Midlands
-
Small-firm friendly
Group Plant & Tool Hire Tender
MAG Airport Limited is seeking a supplier to provide plant hire, tools, lifting equipment, generators, pumps, and associated equipment across Manchester, Stansted and East Midlands airports. The supplier will handle delivery, collection, management information and spend reporting for operational, maintenance and construction activities.
-
ClosedSmall-firm friendly
PLACE864ET
Derbyshire County Council needs maintenance and calibration services for equipment at 5 vehicle maintenance workshops across the county. The service covers approximately 1,600 fleet assets.
-
ClosedSmall-firm friendly
Replacement of Carbon Dioxide and Oxygen analyser to ANSTI machine
The HSE Science Division needs a replacement carbon dioxide and oxygen analyser for their ANSTI respiratory protective equipment testing machine at Harpur Hill. The analyser must integrate with their existing sinusoidal breathing simulator.
-
ClosedSmall-firm friendly
82 Litre Pressure Vessel
The HSE Science Division needs an 82-litre pressure vessel for repetitive battery testing. The vessel must maintain a gas-tight seal through multiple daily open-close cycles.
-
ClosedSmall-firm friendly
Provision of 3D Laser Scanners for Forensic Collision Investigation Unit
Supply of 2 x 3D laser scanners and licensing for the police forensic collision investigation unit. Equipment for accident scene documentation and analysis.
-
ClosedSmall-firm friendly
Loughborough University Wind Tunnel Equipment
Loughborough University is adding measurement and characterisation capability to their National Wind Tunnel Facility. They need specialised equipment to measure spray-generated droplets.
-
ClosedSmall-firm friendly
25 mm Vacuum Insulated Control Valve
HSE needs a 25 mm vacuum-insulated control valve for liquid hydrogen service at cryogenic temperatures (20 K minimum). The valve must have continuous 0–100% analogue control, ATEX Zone 1 rating, and bayonet connections, rated to 22 barg.
-
ClosedSmall-firm friendly
80 mm Vacuum Insulated Control Valve
HSE needs a specialist 80 mm vacuum-insulated control valve for liquid hydrogen service (down to 20 K) with pneumatic actuation and ATEX Zone 1 compliance. Delivery required before August 2026 for their Buxton test site.
-
ClosedSmall-firm friendly
3015 Multiaxial Axial-Torsional Fatigue Testing System
Nottingham Trent University needs an electromechanical axial-torsional fatigue testing system for combined static and dynamic loading tests. The system must allow simultaneous and independent control of axial and torsional forces.
-
ClosedSmall-firm friendly
Gaseous Hydrogen Pressure Reduction Station
HSE needs a bespoke gaseous hydrogen pressure reduction station to step down supply from 500 barg to a controlled outlet of up to 100 barg at 20–400 g/s flow rate. The system must be fully instrumented with ATEX-rated pressure, temperature and mass flow sensors outputting analogue signals, built from stainless 316L pipework and fitted with appropriate flanges for their hydrogen test programme.
-
ClosedSmall-firm friendly
Liquid Hydrogen Flow Conditioning Module for Experimental Programme
The HSE needs a liquid hydrogen flow conditioning module that vaporises cryogenic hydrogen to a controlled gaseous flow (30–400 g/s) at temperatures between 25–50 K, with automatic temperature control via feedback loop.
-
ClosedSmall-firm friendly
National Gas Monitor Support and Training
Border Force needs maintenance and training services for gas monitors used across their fleet nationwide. The supplier must have access to a network of technicians equipped to service the range of monitors in current use.
-
ClosedSmall-firm friendly
Real-time Digital Twin Equipment
University of Nottingham seeks equipment for a real-time digital twin system to monitor and optimise electric aviation propulsion systems. The kit will support research into sustainable air transport through continuous monitoring and predictive maintenance.
-
ClosedFramework
CPU 8311 Electrical Materials
Nottingham City Council Housing Services is establishing a framework for supply of electrical materials to support housing maintenance and repairs. The framework covers cabling, circuit protection, lighting, wiring accessories, meter boxes, smoke alarms, switches, and related components.
-
ClosedSmall-firm friendly
Supply, Installation and Commissioning of a Thermal Vacuum Cycling Chamber
Supply, install and commission a thermal vacuum cycling chamber for environmental testing of spacecraft components and equipment. The system must achieve high vacuum (≤1×10−5 hPa), wide temperature cycling (-190°C to +150°C), and precise thermal control (±0.1°C/min) with contaminant control and data feedthroughs.
-
ClosedSmall-firm friendlyFramework
153_27 Drawing, Measuring and Geometry Equipment
ESPO is establishing a framework to supply drawing, measuring and geometry equipment-rulers, compasses, set squares, protractors and similar items-for delivery to their Leicester warehouse. The framework will feed their education and public sector catalogue.
-
ClosedFramework
2026 WS3282950901 Maintenance, Repairs and Operations Goods (MRO) (Interim)
Anglian Water needs a supplier to provide maintenance, repair and operations goods through an Ariba-hosted catalogue with guided buying, plus a store card option for technicians. The supplier must deliver across the Anglian Water region, including to home addresses and sites, with next-day delivery preferred.
-
ClosedFramework
AP25183 - Electrical Engineering Framework
Arc Property Services is establishing a framework for electrical engineering works across Nottinghamshire County Council's estate and other clients. The framework will appoint up to two contractors to deliver electrical installation, maintenance and upgrades on an as-required basis.